Changed Search Depth:
The player can change depth of search during work of a torpedo.
For change of depth follow by the following steps:
Switch off sensor controls on a torpedo - pressing of the button PREENABLE.
Then, execute the following combination of pressing of buttons: ENABLE-PREENABLE-ENABLE.
( It is necessary to notice, that the combination ENABLE-PREENABLE-ENABLE, works
quickly - on it 5 seconds are allocated - Last pressing of the button ENABLE should be not later
than 5 of seconds from the originally pressed button ENABLE.)
Visually, it can be checked on the display - by pressing the button ENABLE a cone of a torpedo
becomes red color, then by pressing the button PREENABLE - the color of a cone becomes dark
blue, and subsequent pressing ENABLE - cone to become of red color - torpedo will do change
of depth of search.
If is termal a layer, and the torpedo is above than layer, then she will change depth of search so
that he was UNDER a layer. And on the contrary.
If a layer no, then the torpedo simply will change depth of search on large or smaller - depending
on that on what depth there is a torpedo.
The torpedo remembers depth on which the option of change of depth of search was given.
After preenable sensor controls, the torpedo again will restore the previous depth of search.